| |
The b maXX-controllerPLC is the consistent link
between the standard high performance PLC and
the highly dynamic Motion Control PLC.
It meets the requirements of machine manufacturers
with regard to scalability,
modularization and system continuity. System architectures
without drive technology and without PLC‘s
are also realized using the b maXX-controllerPLC.
|
|
- 32 bit processor, 120 MHz
- 2 MB of RAM for max. 400,000 lines of
STL, typically 120,000 lines of STL
- 2 MB of variable memory
- 1.4 MB of memory for debug functions,
e.g. logic analysis
- typically 100 µsec / 1,000 lines
of STL
- 56 KB of non-volatile memory and
4 MB Flash extension (optional)
- 512 digital I/Os, directly addable
- 64 analog I/Os, directly addable
- Expansion modules up to 256 modules
|
I/O terminals can be directly connected to the
b maXX-controllerPLC without the need for additional
bus couplers, which reduces the cost of wiring
and programming.
Communication modules from EtherCAT-Master1),
CANopen-Master, Profibus-Slave1), Ethernet and
a Ethernet/CANopen-Master combination module are
available as add-on modules for the b maXX-controllerPLC.
With a compact installation depth of 90 millimeters,
the b maXX-controllerPLC
will fit in the smallest of switch boxes and is
therefore easy to integrate anywhere.
1) in preparation
|
|
